R718N315 LoRaWAN Wireless 3-Phase Current Meter With 3 X 150A Clamp-On CT

R718N315 LoRaWAN Wireless 3-Phase Current Meter With 3 X 150A Clamp-On CT

  • Product SKU: R718N135
Available: In Stock
Wishlist

R718N315 LoRaWAN Wireless 3-Phase Current Meter With 3 X 150A Clamp-On CT

The NETVOX wireless three-phase current detector is used to detect three-phase electrical input current.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol, and joins the gateway to display the collected data in the gateway.
The device is powered by a battery and receives AC current through a current transformer. This device adopts open-loop current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers.

The communication is fully compatible with LoRaWAN™ Protocol (Class A).

Features:

  • Wireless Range of 10 Km
  • LoRaWAN™ Class A Compatible
  • Frequency Hopping Spread Spectrum (FHSS)
  • Improved Interference Immunity
  • Improved Power Management For Longer Battery Life
  • Encrypt-RF™ Security (Diffie-Hellman Key Exchange + AES-128 CBC For Sensor Data Messages)
  • Battery Life*2:
    ⁻ 5 Years

     (Conditions: Ambient Temperature 25 °C, 20 Triggers/Day, Txpower = 20dBm, LoRa Spreading Factor SF = 10)

  • Over-The-Air Updates

  • Third-Party Online Wireless Sensor Monitoring And Notification System To Configure Sensors, View Data And Set Alerts Via SMS Text And Email (Optional)

  • Available Third-Party Platform: Actility/ThingPark, TTN, MyDevices/Cayenne

    Electric

    Input Power

    2 X 3.6V ER14505 AA Lithium Batteries 
    (3.6V, 2400mah/Section)

    Sleeping Current

    25uA

    Wake Up Current

    7mA

    Receiving Current (Max)

    11mA @3.3V            

    Transmitting Current (Max)

    127mA @3.3V               

    Battery Voltage Measurement
    Accuracy

    ±0.1V

    Current Measurement Accuracy

    <+-1%

    Current Measurement Accuracy Range

    1A To 150A 
    (Depending On The Current Transformer Configuration)


    Frequency

    TX Power

    19dBm±1dBm

    Rx Sensitivity

    -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps )
    -121dBm (FSK,Frequency Deviation=5kHz, Bit Rate=1.2kbps)

    Antenna Type

    Build-In Antenna

    Communication Range

    Up To10 Km, The Actual Transmission Distance Depends On The Environment.

    Data Transfer Rate

    0.3kbps~50kbps

    Spread Technique

    LoRa/FSK

    Available Frequency

    EU863-870,US902-928,AU915-928,
    KR920-923,AS923,CN470-510
    Configured Before Shipment


    Physical

    Dimension

    Main Part: L: 112mm*W: 65mm*H: 32mm

    Weight

    141g

    Environment Temperature Range

    -20℃ ~ 55℃

    Environment Humidity Range

    <90% RH  (No Condensation)

    Storage Temperature

    -40°C~+85°C

     

    Documentation:

    Datasheet

    User manual

     

    R718N315 LoRaWAN Wireless 3-Phase Current Meter With 3 X 150A Clamp-On CT

    The NETVOX wireless three-phase current detector is used to detect three-phase electrical input current.
    The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol, and joins the gateway to display the collected data in the gateway.
    The device is powered by a battery and receives AC current through a current transformer. This device adopts open-loop current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers.

    The communication is fully compatible with LoRaWAN™ Protocol (Class A).

    Features:

    • Wireless Range of 10 Km
    • LoRaWAN™ Class A Compatible
    • Frequency Hopping Spread Spectrum (FHSS)
    • Improved Interference Immunity
    • Improved Power Management For Longer Battery Life
    • Encrypt-RF™ Security (Diffie-Hellman Key Exchange + AES-128 CBC For Sensor Data Messages)
    • Battery Life*2: ⁻ 5 Years

       (Conditions: Ambient Temperature 25 °C, 20 Triggers/Day, Txpower = 20dBm, LoRa Spreading Factor SF = 10)

    • Over-The-Air Updates

    • Third-Party Online Wireless Sensor Monitoring And Notification System To Configure Sensors, View Data And Set Alerts Via SMS Text And Email (Optional)

    • Available Third-Party Platform: Actility/ThingPark, TTN, MyDevices/Cayenne

      Electric

      Input Power

      2 X 3.6V ER14505 AA Lithium Batteries 
      (3.6V, 2400mah/Section)

      Sleeping Current

      25uA

      Wake Up Current

      7mA

      Receiving Current (Max)

      11mA @3.3V            

      Transmitting Current (Max)

      127mA @3.3V               

      Battery Voltage Measurement
      Accuracy

      ±0.1V

      Current Measurement Accuracy

      <+-1%

      Current Measurement Accuracy Range

      1A To 150A 
      (Depending On The Current Transformer Configuration)


      Frequency

      TX Power

      19dBm±1dBm

      Rx Sensitivity

      -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps )
      -121dBm (FSK,Frequency Deviation=5kHz, Bit Rate=1.2kbps)

      Antenna Type

      Build-In Antenna

      Communication Range

      Up To10 Km, The Actual Transmission Distance Depends On The Environment.

      Data Transfer Rate

      0.3kbps~50kbps

      Spread Technique

      LoRa/FSK

      Available Frequency

      EU863-870,US902-928,AU915-928,
      KR920-923,AS923,CN470-510
      Configured Before Shipment


      Physical

      Dimension

      Main Part: L: 112mm*W: 65mm*H: 32mm

      Weight

      141g

      Environment Temperature Range

      -20℃ ~ 55℃

      Environment Humidity Range

      <90% RH  (No Condensation)

      Storage Temperature

      -40°C~+85°C

       

      Documentation:

      Datasheet

      User manual