Industrial pH Probe - Atlas Scientific

Industrial pH Probe - Atlas Scientific

  • Product SKU: ENV-50-pH
Available: In Stock
Wishlist

Industrial pH Probe - Atlas Scientific

Specifications

  • Range: 0 – 14 pH
  • Body Material: Ryton thermoplastic
  • Max Temp: 100°C (212°F)
  • Max Pressure: 689.47 kPa (100 Psi) at <= 75°C
  • 81 Psi at 85°C 50 Psi at 100°C
  • Cable length: 3.048 Meters (10Ft)
  • Weight: 250 grams
  • Threading: (3/4″) NPT
  • Integrated PT-1000 RTD Temperature sensor

This pH Probe can be fully submerged in fresh water or salt water, up to the tinned leads
indefinitely.

How to connect the industrial pH probe

Not like our other pH probes, this industrial probe comes without a BNC connector. This is perfect if you have a IXIAN pH transmitter or any other industrial device with terminal screws to connect the probe.

81

If you want to use it on a Tentacle Isolation board (or any other device that expects a BNC connector), you’ll want to additionally buy our BNC connector with terminal screws. As this probe is actually a pH probe PLUS a PT-1000 temperature probe, you can connect it to an EZO pH circuit and an EZO RTD circuit simultaneously (see image on the left).

 

Industrial pH Probe - Atlas Scientific

Specifications

  • Range: 0 – 14 pH
  • Body Material: Ryton thermoplastic
  • Max Temp: 100°C (212°F)
  • Max Pressure: 689.47 kPa (100 Psi) at <= 75°C
  • 81 Psi at 85°C 50 Psi at 100°C
  • Cable length: 3.048 Meters (10Ft)
  • Weight: 250 grams
  • Threading: (3/4″) NPT
  • Integrated PT-1000 RTD Temperature sensor

Downloads

This pH Probe can be fully submerged in fresh water or salt water, up to the tinned leads
indefinitely.

How to connect the industrial pH probe

Not like our other pH probes, this industrial probe comes without a BNC connector. This is perfect if you have a IXIAN pH transmitter or any other industrial device with terminal screws to connect the probe.

81

If you want to use it on a Tentacle Isolation board (or any other device that expects a BNC connector), you’ll want to additionally buy our BNC connector with terminal screws. As this probe is actually a pH probe PLUS a PT-1000 temperature probe, you can connect it to an EZO pH circuit and an EZO RTD circuit simultaneously (see image on the left).