Capacitive Proximity Sensor 8mm CR18SCN08DNO

Capacitive Proximity Sensor 8mm CR18SCN08DNO

Available: In Stock
Wishlist

Capacitive Proximity Sensor 8mm CR18SCN08DNO

This capacitive sensor will switch when it detects metals and some other materials within 8mm.

This capacitive proximity sensor is used for non-contact detection of metallic and non-metallic objects such as liquid, powder and granular materials; it can also detect materials through glass or plastic walls.

Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness and type of material being detected.

You can adjust the operating distance by turning a screw placed on the side of the sensor.

Comes packaged with

  • 2 plastic rings
  • a screwdriver

Accessories

Product Specifications

Sensor Properties
Controlled By Digital Input (5V)
Detecting Distance Max 8 mm
Setting Distance Max 6.4 mm
Sensor Type Proximity (Capacitive)
Sensor Output Switch Type Normally Open
Detection Hysteresis Min 3 %
Detection Hysteresis Max 20 %
Sensor Response Time Max 20 ms
Electrical Properties
Supply Voltage Min 10 V DC
Supply Voltage Max 30 V DC
Current Consumption Max 15 mA
Protection Circuitry Reverse Polarity, Surge, Overload and Short-Circuit
Physical Properties
Cable Length 2 m
Material PBT
Operating Indicator Yellow LED
IP Rating IP67
Length 78 mm
Diameter 18 mm
Operating Temperature Min -25 °C
Operating Temperature Max 70 °C
Operating Humidity Min 35 %RH
Operating Humidity Max 95 %RH

Documents

    This sensor requires a 12V power supply and outputs a 0-5V signal depending on whether the sensor is triggered. For a simple way to provide 12 volts, you can use our 12V sensor adapter. It uses the 5V supply from your InterfaceKit or Hub and steps it up to 12V while simultaneously passing the 0-5V signal from the sensor into the Phidget cable.

     

      Capacitive Proximity Sensor 8mm CR18SCN08DNO

      This capacitive sensor will switch when it detects metals and some other materials within 8mm.

      This capacitive proximity sensor is used for non-contact detection of metallic and non-metallic objects such as liquid, powder and granular materials; it can also detect materials through glass or plastic walls.

      Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness and type of material being detected.

      You can adjust the operating distance by turning a screw placed on the side of the sensor.

      Comes packaged with

      • 2 plastic rings
      • a screwdriver

      Accessories

      Product Specifications

      Sensor Properties
      Controlled By Digital Input (5V)
      Detecting Distance Max 8 mm
      Setting Distance Max 6.4 mm
      Sensor Type Proximity (Capacitive)
      Sensor Output Switch Type Normally Open
      Detection Hysteresis Min 3 %
      Detection Hysteresis Max 20 %
      Sensor Response Time Max 20 ms
      Electrical Properties
      Supply Voltage Min 10 V DC
      Supply Voltage Max 30 V DC
      Current Consumption Max 15 mA
      Protection Circuitry Reverse Polarity, Surge, Overload and Short-Circuit
      Physical Properties
      Cable Length 2 m
      Material PBT
      Operating Indicator Yellow LED
      IP Rating IP67
      Length 78 mm
      Diameter 18 mm
      Operating Temperature Min -25 °C
      Operating Temperature Max 70 °C
      Operating Humidity Min 35 %RH
      Operating Humidity Max 95 %RH

      Documents

        This sensor requires a 12V power supply and outputs a 0-5V signal depending on whether the sensor is triggered. For a simple way to provide 12 volts, you can use our 12V sensor adapter. It uses the 5V supply from your InterfaceKit or Hub and steps it up to 12V while simultaneously passing the 0-5V signal from the sensor into the Phidget cable.