mBus 60 - RS232/RS485 to M-Bus Master Converter

mBus 60 - RS232/RS485 to M-Bus Master Converter

  • Product SKU: mBus60-RS232
Available: In Stock
Wishlist

mBus 60 - RS232/RS485 to M-Bus Master Converter

mBus 60 converter is a transparent converter from RS485 to MBus interface. On MBus side it works as MBus master and enables to connect maximum 60 standard MBus receivers (slaves). Additionally, thanks to embedded MBus slave input mBus60-RS485 can operate as MBus signal buster. It can be used with all devices equipped with MBus interface like: heating energy meters, electric energy meters, data recorders and many others with MBus interface. mBus60-RS485 can successfully replace PW3, PW20, PW60 Relay M-Bus level converter, any other M-Bus master converter or M-Bus signal buster.

mBus60-RS485 converter is equipped with LED indicators. There are screw terminal block connectors on the Power supply, MBus Master and MBus Slave side and BH10 (10 pins) connector on the RS485 side.

 

Features
  • RS485 to MBus level conversion
  • Can operate as MBus signal booster / Repeater
  • Maximum 60 MBus slaves
  • Baud Rate: 300 to 19200 bps
  • RS485 – MBus opto isolation
  • Over-current and short-circuit protection on the MBus
  • LED display for power, overload, and data transmission
  • Power supply: 20 ~ 35 Vdc or 20 ~ 24 Vac.
  • Rail mounting

 

The device is made of ABS plastic, which is resistant to external factors. Housing is adapted for installation to a DIN rail. In addition, the converter is equipped with LEDs indicating power supply, transmission, and data reception. The connection interfaces are made of screw clamp terminal blocks for connecting any device equipped with RS-232 interface.

It can be used with any devices equipped with M-Bus interface, such as: 

  • heat meters
  • electricity meters
  • executive modules
  • recorders
  • data integrators with M-Bus interface
Product specification
Hardware:
Transparent conversion from RS232 to MBus master
MBus slave input - can operate as MBus signal booster
LED Indicators: Tx, Rx, MBus overload, power supply
Interface:
Baud Rate

300 ~ 19200 bps

RS-232

TxD, RxD, GND

MBus Master:

M1, M2

Maximum M-Bus receivers

60 (MBus Slave)

Surge Protection / Over Voltage Protection M-Bus Interface:

43V 600W/1ms

MBus Slave:

S1, S2

Opto Isolation:

RS232~MBus – 100 V AC/DC.
RS232~zasilanie – 100 V AC/DC.
Zasilanie~MBus – 100 V AC/DC

Operating Conditions:
Power Input:

20 ~ 35 Vdc, 20 ~ 24 Vac.
Maximum power consumption: 12W

Operating temperature:

0 ~ 60°C

Storage temperature:

-20 ~ 85°C

Humidity:

5 ~ 95%RH (without condensation)

Dimensions:

70x90x60 mm

Certifications
CE (EN 55022:1998 Class A, EN 61000-3-2:2000, EN 61000-3-3:1995, EN 55024:1998)

Documentations:

Direct link: http://documents.techbase.eu/doku.php?id=en:start
login: techbaseclient
password: aurora2014

Link to download mBus 60 Datasheet

 

mBus 60 - RS232/RS485 to M-Bus Master Converter

mBus 60 converter is a transparent converter from RS485 to MBus interface. On MBus side it works as MBus master and enables to connect maximum 60 standard MBus receivers (slaves). Additionally, thanks to embedded MBus slave input mBus60-RS485 can operate as MBus signal buster. It can be used with all devices equipped with MBus interface like: heating energy meters, electric energy meters, data recorders and many others with MBus interface. mBus60-RS485 can successfully replace PW3, PW20, PW60 Relay M-Bus level converter, any other M-Bus master converter or M-Bus signal buster.

mBus60-RS485 converter is equipped with LED indicators. There are screw terminal block connectors on the Power supply, MBus Master and MBus Slave side and BH10 (10 pins) connector on the RS485 side.

 

Features
  • RS485 to MBus level conversion
  • Can operate as MBus signal booster / Repeater
  • Maximum 60 MBus slaves
  • Baud Rate: 300 to 19200 bps
  • RS485 – MBus opto isolation
  • Over-current and short-circuit protection on the MBus
  • LED display for power, overload, and data transmission
  • Power supply: 20 ~ 35 Vdc or 20 ~ 24 Vac.
  • Rail mounting

 

The device is made of ABS plastic, which is resistant to external factors. Housing is adapted for installation to a DIN rail. In addition, the converter is equipped with LEDs indicating power supply, transmission, and data reception. The connection interfaces are made of screw clamp terminal blocks for connecting any device equipped with RS-232 interface.

It can be used with any devices equipped with M-Bus interface, such as: 

  • heat meters
  • electricity meters
  • executive modules
  • recorders
  • data integrators with M-Bus interface
Product specification
Hardware:
Transparent conversion from RS232 to MBus master
MBus slave input - can operate as MBus signal booster
LED Indicators: Tx, Rx, MBus overload, power supply
Interface:
Baud Rate

300 ~ 19200 bps

RS-232

TxD, RxD, GND

MBus Master:

M1, M2

Maximum M-Bus receivers

60 (MBus Slave)

Surge Protection / Over Voltage Protection M-Bus Interface:

43V 600W/1ms

MBus Slave:

S1, S2

Opto Isolation:

RS232~MBus – 100 V AC/DC.
RS232~zasilanie – 100 V AC/DC.
Zasilanie~MBus – 100 V AC/DC

Operating Conditions:
Power Input:

20 ~ 35 Vdc, 20 ~ 24 Vac.
Maximum power consumption: 12W

Operating temperature:

0 ~ 60°C

Storage temperature:

-20 ~ 85°C

Humidity:

5 ~ 95%RH (without condensation)

Dimensions:

70x90x60 mm

Certifications
CE (EN 55022:1998 Class A, EN 61000-3-2:2000, EN 61000-3-3:1995, EN 55024:1998)

Documentations:

Direct link: http://documents.techbase.eu/doku.php?id=en:start
login: techbaseclient
password: aurora2014

Link to download mBus 60 Datasheet