R718N115 LoRaWAN Wireless 1-Phase Current Meter with 1 X 150A Clamp-On CT

R718N115 LoRaWAN Wireless 1-Phase Current Meter with 1 X 150A Clamp-On CT

Available: In Stock
Wishlist

R718N115 LoRaWAN Wireless 1-Phase Current Meter with 1 X 150A Clamp-On CT

The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device is powered by the battery and obtains the load AC current value through the current transformer.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.

The communication is fully compatible with LoRaWAN™ Protocol (Class A).

Features:

  • Wireless Range of 10 Km
  • LoRaWAN™ Class A Compatible
  • Frequency Hopping Spread Spectrum (FHSS)
  • Improved Interference Immunity
  • Improved Power Management For Longer Battery Life
  • Encrypt-RF™ Security (Diffie-Hellman Key Exchange + AES-128 CBC For Sensor Data Messages)
  • Battery Life*2:
    ⁻ 5 Years

     (Conditions: Ambient Temperature 25 °C, 20 Triggers/Day, Txpower = 20dBm, LoRa Spreading Factor SF = 10)

  • Over-The-Air Updates

  • Third-Party Online Wireless Sensor Monitoring And Notification System To Configure Sensors, View Data And Set Alerts Via SMS Text And Email (Optional)

  • Available Third-Party Platform: Actility/ThingPark, TTN, MyDevices/Cayenne

    Electric

    Input Power

    2 X 3.6V ER14505 Lithium Batteries Parallel Power Supply
    (3.6V, 2400mah/Section)

    Sleeping Current

    25uA

    Wake Up Current

    7mA

    Receiving Current (Max)

    11mA @3.3V            

    Transmitting Current (Max)

    127mA @3.3V               

    Battery Voltage Measurement
    Accuracy

    ±0.1V

    Current Measurement Accuracy

    <+-1%

    Current Measurement Accuracy Range

    1A To 150A  (Depending On The Current Transformer Configuration)


    Frequency

    TX Power

    19dBm±1dBm

    Rx Sensitivity

    -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps )
    -121dBm (FSK,Frequency Deviation=5kHz, Bit Rate=1.2kbps)

    Antenna Type

    Build-In Antenna

    Communication Range

    Up To 10 Km, The Actual Transmission Distance Depends On The Environment.

    Data Transfer Rate

    0.3kbps~50kbps

    Spread Technique

    LoRa/FSK

    Available Frequency

    EU863-870, US902-928, AU915-928, KR920-923, AS923, CN470-510  Configured Before Shipment


    Physical

    Dimension

    Main Part: L: 112mm*W: 65mm*H: 32mm

    Weight

    141g

    Environment Temperature Range

    -20℃ ~ 55℃

    Environment Humidity Range

    <90% RH  (No Condensation)

    Storage Temperature Range

    -40°C~+85°C

     

    Documentation:

    Datasheet

    User manual

     

    R718N115 LoRaWAN Wireless 1-Phase Current Meter with 1 X 150A Clamp-On CT

    The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
    The device is powered by the battery and obtains the load AC current value through the current transformer.
    The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.

    The communication is fully compatible with LoRaWAN™ Protocol (Class A).

    Features:

    • Wireless Range of 10 Km
    • LoRaWAN™ Class A Compatible
    • Frequency Hopping Spread Spectrum (FHSS)
    • Improved Interference Immunity
    • Improved Power Management For Longer Battery Life
    • Encrypt-RF™ Security (Diffie-Hellman Key Exchange + AES-128 CBC For Sensor Data Messages)
    • Battery Life*2: ⁻ 5 Years

       (Conditions: Ambient Temperature 25 °C, 20 Triggers/Day, Txpower = 20dBm, LoRa Spreading Factor SF = 10)

    • Over-The-Air Updates

    • Third-Party Online Wireless Sensor Monitoring And Notification System To Configure Sensors, View Data And Set Alerts Via SMS Text And Email (Optional)

    • Available Third-Party Platform: Actility/ThingPark, TTN, MyDevices/Cayenne

      Electric

      Input Power

      2 X 3.6V ER14505 Lithium Batteries Parallel Power Supply
      (3.6V, 2400mah/Section)

      Sleeping Current

      25uA

      Wake Up Current

      7mA

      Receiving Current (Max)

      11mA @3.3V            

      Transmitting Current (Max)

      127mA @3.3V               

      Battery Voltage Measurement
      Accuracy

      ±0.1V

      Current Measurement Accuracy

      <+-1%

      Current Measurement Accuracy Range

      1A To 150A  (Depending On The Current Transformer Configuration)


      Frequency

      TX Power

      19dBm±1dBm

      Rx Sensitivity

      -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps )
      -121dBm (FSK,Frequency Deviation=5kHz, Bit Rate=1.2kbps)

      Antenna Type

      Build-In Antenna

      Communication Range

      Up To 10 Km, The Actual Transmission Distance Depends On The Environment.

      Data Transfer Rate

      0.3kbps~50kbps

      Spread Technique

      LoRa/FSK

      Available Frequency

      EU863-870, US902-928, AU915-928, KR920-923, AS923, CN470-510  Configured Before Shipment


      Physical

      Dimension

      Main Part: L: 112mm*W: 65mm*H: 32mm

      Weight

      141g

      Environment Temperature Range

      -20℃ ~ 55℃

      Environment Humidity Range

      <90% RH  (No Condensation)

      Storage Temperature Range

      -40°C~+85°C

       

      Documentation:

      Datasheet

      User manual