TW810 INDUSTRIAL LTE CAT-M1 & NB-IOT MODEM WITH TERMINAL BLOCK SUPPORTS RS-232/485/422 I/O

TW810 INDUSTRIAL LTE CAT-M1 & NB-IOT MODEM WITH TERMINAL BLOCK SUPPORTS RS-232/485/422 I/O

Available: In Stock
Wishlist

TW810 INDUSTRIAL LTE CAT-M1 & NB-IOT MODEM WITH TERMINAL BLOCK SUPPORTS RS-232/485/422 I/O

TW810-GL: Industrial NB-IoT Modem (B1/B3/B8/B5/B20/B28)
TW810-MS7E: Industrial LTE CAT M1/NB1 Modem (Quad-Band FDD-LTE B3/B8/B20/B28 GPRS/EDGE 900/1800 MHz)

  • Industrial MCU built in, rugged and reliable
  • LTE Cat M1, NB-IoT and EDGE/GPRS compatible
  • 1-RS232, 1-RS485
  • Modbus RTU, TCP/UDP, AT Command
  • Up to 5 sync data center
  • Wide operation voltage: 5-35VDC
  • Working temperature: -35C~+75C

Key Features

1.  Support NB-IoT and LTE CAT-M1 cellular network
2.  1x RS232, 1x RS485 (Or RS422), 5x I/O.
3.  Transparent data transfer, with built-in standard UDP/IP stack.
4.  Multi data centers (up to 5), able to access center with the domain name and IP address.
5.  Support heartbeat link detection, keep device always online.
6.  Hardware and software auto inspection technology, enable operation fault auto repairing.

7. OPEN WRT, support multiple developments

INTERFACE
 

Power Requirements
Standard Power DC 12V/0.5A
Power Range DC 5~35V
Communication Current <85mA(12V)
Built-in power inverting protection and over voltage protection
Serial Port
RS232, or RS485 (or RS422)
Industrial terminal block interface, ideal for industrial applications.
 
Built in 15KV ESD protection, TTL GPIOs is customizable, 5-channel I/O
Serial Port Rate 300~230400bits/s
Data Bit 5, 6, 7, 8 bits
Stop Bit 1, 1.5, 2 bits
Check No check, Even-parity Check, Odd Parity Check, SPACE and MARK check
Analog Quantity
2x analog quantity input(10-bit AD, support 4-20mA current signal input, optional 0-5V voltage signal input)
I/O
3x GPIOs, able to configured as input and output, communication level: 3.3V
Others
Indicators System, Power, Online, Act
Antenna Standard SMA female antenna interface, characteristic impedance 50Ω
SIM/UIM Card Holder

Standard drawer type card holder, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection

 
Product Characteristics
 

Environmental Limits
Operating Temperature: -35~+75ºC(-31~+167 ºF) Storage Temperature: -40~+80ºC(-40~+176 ºF)
Ambient Relative Humidity: 95%, non-condensing
Power Consumption
Communication <1W
Note: 12V(<85mA), 5V(<155mA)
Standby <0.4W
Note: 12V(<30mA), 5V(<55mA)
Sleep <0.1W
Note: 12V(<0.8mA), 5V(<18mA)
Anti-interference
Type Level Voltage/Current Waveform Value
Power Frequency Magnetic Field 3 Continuous sine wave 30A/m
Damped Oscillatory Magnetic Field 3 Continuous sine wave 30A/m
Pulse Magnetic Field 3 Pulse 100A/m
Radiated Electromagnetic Field 3 80MHz~1000MHz Continuous-wave 10V/m
Level 3, suitable for equipment installed in a typical industrial environment: Plant, Power Plant, or residential area.
Protection Class
IP30, Housing, and system are isolated safely, ideal for industrial automation application
Reliability
MTBF(mean time between failures): >10,000hrs
Ultra-low consumption design includes sleep mode, scheduled online and offline mode
EMC up to level 3
Adopt NTP technology, build-in RTC
SIM/UIM card port built-in 15KV ESD protection
Weights and Dimension
Dimension: 91x58.5x22 mm(3.58x2.30x0.87 inches ), Antenna and other accessories not included
Weight: 208g(0.46lbs)

 

DOCUMENTS

SDK

      TW810 INDUSTRIAL LTE CAT-M1 & NB-IOT MODEM WITH TERMINAL BLOCK SUPPORTS RS-232/485/422 I/O

      TW810-GL: Industrial NB-IoT Modem (B1/B3/B8/B5/B20/B28)
      TW810-MS7E: Industrial LTE CAT M1/NB1 Modem (Quad-Band FDD-LTE B3/B8/B20/B28 GPRS/EDGE 900/1800 MHz)

      • Industrial MCU built in, rugged and reliable
      • LTE Cat M1, NB-IoT and EDGE/GPRS compatible
      • 1-RS232, 1-RS485
      • Modbus RTU, TCP/UDP, AT Command
      • Up to 5 sync data center
      • Wide operation voltage: 5-35VDC
      • Working temperature: -35C~+75C

      Key Features

      1.  Support NB-IoT and LTE CAT-M1 cellular network
      2.  1x RS232, 1x RS485 (Or RS422), 5x I/O.
      3.  Transparent data transfer, with built-in standard UDP/IP stack.
      4.  Multi data centers (up to 5), able to access center with the domain name and IP address.
      5.  Support heartbeat link detection, keep device always online.
      6.  Hardware and software auto inspection technology, enable operation fault auto repairing.

      7. OPEN WRT, support multiple developments

      INTERFACE
       

      Power Requirements
      Standard Power DC 12V/0.5A
      Power Range DC 5~35V
      Communication Current <85mA(12V)
      Built-in power inverting protection and over voltage protection
      Serial Port
      RS232, or RS485 (or RS422)
      Industrial terminal block interface, ideal for industrial applications.
       
      Built in 15KV ESD protection, TTL GPIOs is customizable, 5-channel I/O
      Serial Port Rate 300~230400bits/s
      Data Bit 5, 6, 7, 8 bits
      Stop Bit 1, 1.5, 2 bits
      Check No check, Even-parity Check, Odd Parity Check, SPACE and MARK check
      Analog Quantity
      2x analog quantity input(10-bit AD, support 4-20mA current signal input, optional 0-5V voltage signal input)
      I/O
      3x GPIOs, able to configured as input and output, communication level: 3.3V
      Others
      Indicators System, Power, Online, Act
      Antenna Standard SMA female antenna interface, characteristic impedance 50Ω
      SIM/UIM Card Holder

      Standard drawer type card holder, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection

       
      Product Characteristics
       

      Environmental Limits
      Operating Temperature: -35~+75ºC(-31~+167 ºF) Storage Temperature: -40~+80ºC(-40~+176 ºF)
      Ambient Relative Humidity: 95%, non-condensing
      Power Consumption
      Communication <1W
      Note: 12V(<85mA), 5V(<155mA)
      Standby <0.4W
      Note: 12V(<30mA), 5V(<55mA)
      Sleep <0.1W
      Note: 12V(<0.8mA), 5V(<18mA)
      Anti-interference
      Type Level Voltage/Current Waveform Value
      Power Frequency Magnetic Field 3 Continuous sine wave 30A/m
      Damped Oscillatory Magnetic Field 3 Continuous sine wave 30A/m
      Pulse Magnetic Field 3 Pulse 100A/m
      Radiated Electromagnetic Field 3 80MHz~1000MHz Continuous-wave 10V/m
      Level 3, suitable for equipment installed in a typical industrial environment: Plant, Power Plant, or residential area.
      Protection Class
      IP30, Housing, and system are isolated safely, ideal for industrial automation application
      Reliability
      MTBF(mean time between failures): >10,000hrs
      Ultra-low consumption design includes sleep mode, scheduled online and offline mode
      EMC up to level 3
      Adopt NTP technology, build-in RTC
      SIM/UIM card port built-in 15KV ESD protection
      Weights and Dimension
      Dimension: 91x58.5x22 mm(3.58x2.30x0.87 inches ), Antenna and other accessories not included
      Weight: 208g(0.46lbs)

       

      DOCUMENTS

      SDK